测量与测量 | 半自动仪表 | Benchmark™台式出凸缘度仪

Benchmark Series logo

台式出凸缘度仪

测饮料罐的出凸厚度

Benchmark™ 出凸缘度仪是一款易于使用的半自动台式仪，用于测量饮料罐的出凸厚度。出凸是罐体上最重要的物理特征，因为它是罐体和罐盖之间的关键连接点。精确测量出凸缘度对于评估灌装罐双层封口的完整性至关重要

  • 适用于多种罐体和罐颈尺寸
  • 可对出凸周围进行多角度测量
  • 采用快速更换、无需工具的插片，可适配多种罐体和罐颈尺寸
  • 支持 -10° 至 +16° 的出凸角度
  • 测量结果显示在屏幕上、打印出来或发送到统计过程控制系统 (SPC)
  • 易于使用，无语言限制，触摸屏人机界面 (HMI)
  • 测量周期短
icon for 2-piece (DWI) food cansFor 2-piece (DWI) cans
icon for can fillersFor can filling lines
订购信息
规格
细节
产品系列
支持资源

Benchmark™台式出凸缘度仪

SortProductPageProduct CodeDescription
200SI660xSI6600Benchmark™ Flange Thickness Gauge

产品能力

Sort:
1
ProductPage:
SI660x
Material:
Aluminum and Steel
Cans Accepted:
Body Diameter: Up to 73mm (2.87") nominally 214
Neck Diameter: from 52mm to 57mm (2.05" to 2.24") nominally 200 to 209
Can Height: 205mm (8")
Maximum Batch Size:
30 cans
Measurement Features:
Multiple slices can be measured - user definable up to 16 points
Automatically adjusts for different can heights
Up to 20 different test procedures (user programmable) with test type distinctions for production, setup, recheck, etc.
User-programmable pass, fail and warning bands settable for each procedure
Password protected user levels (operator, supervisor and engineer) to protect settings from unauthorised changes
Accuracy:
±2µm


规格

Sort:
1
ProductPage:
SI660x
Voltage:
100 –240 V
Temperature Range:
10°C to 40°C (50°F to 104°F)
Relative Humidity:
0% to 80% non-condensing
Ingress Protection:
IP44
Controller:
Integrated 9” high resolution touch-screen. Icon based HMI (no language dependency).
Measurement Reporting:
Tabular results page. Results for most recent 50 batches stored on gauge. Batch results can be output via RS232 port.
Loading:
Manual loading and unloading
Dimensions:
400 x 569 x 565 mm (15.7" x 22.4" x 22.2")
Weight:
45kg (99.2lb) approximately
Compliance:
CE marked, complies with relevant EU product directives. CA marked: complies with relevant UK product regulations.
Calibration:
Annual recalibration / re-validation of gauge accuracy is strongly recommended

由于产品不断开发，实际规格可能会发生变化。电&OE

World's first reliable flange thickness measurement

A 'lost' measurement

Flange thickness has been part of the specification for beverage and food cans for many years, because this dimension is critical to seaming performance and can integrity. Setting and assessing seam tightness is one of the most important quality control issues for fillers. This crucial function relies on knowing the thickness of the flange on the cans they receive from their suppliers. Until now, this data has relied on inherently variabe manual measurements, or it is simply recorded as a nominal value based on top wall measurent of trimmmed cans at the 'front end' stage of production before the flange has been formed.

A highly reliable instrument

Developed in response to customer requests, Sencon’s benchtop Flange Thickness gauge delivers the industry’s first high-precision solution for measuring this key dimension on the can specification. The gauge uses a Linear Variable Differential Transformer (LVDT) with 1mm ruby tips mounted on a floating gimble that applies near-zero force to the flange. Together with a horizontal loading system that prevents lacquer distortion at the point of measurement, maximum accuracy is assured.

Fast, accurate, and easy-to-use

Users can set and store up to 20 user-programmable test procedures via a 9-inch high-resolution icon-driven color touchscreen. The gauge's short cycle time delivers a measurement range of 0 to 0.3 mm with highly repeatable results to ±2μm accuracy. Quick-change, tool-free inserts allow for rapid change can sizes, with change parts conveniently stored inside the gauge.

Benefits of Benchmark™ Series Gauges

The Benchmark Series is a uniquely comprehensive range of benchtop gauges for beverage can measurement, test and inspection. The gauges use the same advanced technologies as the fully automatic Master Series™, making available Sencon's well-proven gauging solutions in compact, standalone units that are well suited to the quality assurance laboratory and are equally at home beside the production line.

Fast, semi-automatic operation

Procedures are defined and selected with Sencon's proprietary Process Master™ gauging software or via intuitive touch screen icons. Then as soon as a can is loaded and the safety door closed the test is automatically carried out.

Multiple can sizes

The gauges all accept different can body and neck diameters and can heights, with either no change parts or quick-fit inserts (see individual pages for details).

Flexible configuration

The gauges are highly configurable for test parameters, setting up of operator and supervisor presets, and for display and output of results.

Excellent R&R for better process control

Reliable and consistent measurements from gauges with excellent R&R (repeatability and reproducibility) allow manufacturers to gain better control of their process. Sencon has carefully researched and developed appropriate technologies for each test to deliver accuracy and efficiency in the beverage can making plant. The gauges are constantly self-monitoring and self-calibrating to ensure optimum performance at all times.

Low maintenance, low running costs

Each gauge is designed for low maintenance, eliminating wear parts where possible to reduce running costs and maximize durability

Benchtop

FRONT END
(TRIMMED CAN) GAUGE

The Benchmark™ semi-automatic front end gauge takes measurements of key dimensions on front end trimmed and un-necked beverage cans.


点击查看更多
Benchtop

BACK END
(FINISHED CAN) GAUGE

The Benchmark™ semi-automatic back end gauge takes measurements of key dimensions on finished ('back end') beverage cans.


点击查看更多
Benchtop

BUCKLE TESTER
(DOME REVERSAL) GAUGE

The Benchmark™ semi-automatic buckle (dome reversal) gauge measures the pressure required to reverse the dome on beverage cans.


点击查看更多
Benchtop

AXIAL LOAD
GAUGE

The Benchmark™ semi-automatic axial load gauge measures the maximum force which can be applied in the axial plane before deformation of the can.


点击查看更多
Benchtop

FILM-SCAN™
OPTICAL COATINGS GAUGE

A compact, semi-automatic benchtop gauge for non-contact, optical scanning measurement of coatings/film thickness on beverage cans.


点击查看更多
Benchtop

DOME REFORM
GAUGE (DRG)

The Benchmark™ dome reform gauge (DRG) carries out a complete and detailed, non-contact, 360° optical scan of the reform feature beverage can domes.


点击查看更多
document library icon

技术文献库要

访问 Benchmark™台式出凸缘度仪 户手册、软件和其他资源 请登录 我们的技术文档库。 如果您没有用户帐户，您可以在此处请求注册。.

请注意: 需要公司电子邮件地址才能访问。不接受个人和基于网络的电子邮件帐户（例如 gmail）。请注意，注册过程不是自动化的，因此根据提出请求的时间，授予访问权限可能会延迟

小占地面积，大性能

Benchmark™ 台式测量仪 – 适用于制罐厂的全系列半自动测量仪

查看该产品的实际应用

您可以信赖的全球服务和支持

Sencon 拥有遍布北美、南美、欧洲和亚洲的服务工程师，并由三个技术支持中心经验丰富的行业专家提供支持，您可以信赖 为您的Benchmark™台式出凸缘度仪提供支持、认可的校准和售后服务.

全球 95% 的饮料罐在其制造过程中均经过 SENCON 产品的测量、测试、监控或受带领