电导仪支架

电导仪支架和适配器可快速准确地对各种罐类型进行电导。与 SI9100 半自动电导仪结合使用

电导仪支架与半自动电导仪配合使用,可检查 2 片和 3 片食品和饮料罐上漆的完整性。

  • 可以快速准确地对各种罐类型进行电导仪检查
  • 易于维护的设计
  • 自动液位检查——电解质液位检查探头可防止测量未充满的罐子
  • 内置测试按钮可确认仪表和是否可以正常运行
  • 灵活、故障安全且耐用
  • 与 Sencon SI9100 搪瓷评级仪配合使用
icon for 2-piece (DWI) food cansFor 2-piece (DWI) cans
icon for 3-piece (welded) food cansFor 3-piece (welded) cans
icon for can fillersFor can filling lines
订购信息
规格
细节
配件
支持资源

电导仪支架

SortProductPageProduct CodeDescriptionCan BodyCable Supplied
183SI9008SI9101Beverage Can Stand: For straight walled or necked cans202 (54mm) to 214 (73mm)8 pin cable
183SI9008SI9201Beverage Can Stand: Self checking can stand for use with the SI9200. Available Q3202 (54mm) to 214 (73mm)8 pin cable
196SI9008SI9102General Can Stand: Designed to accept a wide range of cansUp to 100mm (3.93") diameter8 pin cable
196SI9008SI9202General Can Stand: Self checking can stand for use with the SI9200. Available Q3Up to 100mm (3.93") diameter8 pin cable
197SI9008SI9103Superstand™ for outsize products - for use with SI9100Up to 190mm (7.5")8 pin cable
198SI9008SI9203Superstand™ for outsize products - for use with SI9200Up to 190mm (7.5")8 pin cable

针版本与 SI9100 Enamel Rater 兼容,可监视和控制整个组合设备的测试电压。较旧的 SI9000+ Enamel Rater 需要带有 5 针电缆的支架(5 针版本不允许测试电压控制)。


选项和配件

SortProductLinkProduct CodeItemDescription
0SI9008, SI9108, SI9015, SI9019, SI9101, SI9102SI9200Semi Automatic Enamel RaterA semi-automatic enamel rater that tests for metal exposure by checking the integrity of coatings or lacquer on metal packaging. See product page for more Information
10SI9008113-17851-80211 can centering ringQuick change can centering ring for 211 cans
11SI9008113-17852-80209 can centering ringQuick change can centering ring for 209 cans
12SI9008113-17853-80Sleek can centering ringQuick change can centering ring for Sleek cans
13SI9008113-17854-80202 can centering ringQuick change can centering ring for 202 cans
14SI9008113-17855-8073mm can centering ringQuick change can centering ring for 73mm cans

产品能力

Sort:
1
ProductPage:
SI9008
Material:
Aluminium and Steel
Cans Accepted:
SI9201/SI9101 Beverage can stand:
Maximum can height (external): 195 mm (7.67”)
Minimum can height (internal): 63 mm (2.48”) from inside bottom panel / dome to neck
Maximum body diameter: 73mm (2.87”)*
Minimum body diameter: 50mm (1.97”)*
Minimum stand diameter: 40mm (1.57”)
Minimum neck diameter: 40mm (1.57”)

SI9202/SI9102 General can stand:
Maximum can height (external): 195 mm (7.67”)
Minimum can height (internal): 65 mm (2.56”) from inside bottom panel / dome to neck
Maximum body diameter: 100mm (3.93”)*
Minimum body diameter: 40mm (1.57”)*
Minimum neck diameter: 40mm (1.57”)

SI9203/SI9103 Superstand™:
Maximum Can Height: 320 mm (12.60”)
Maximum Body Diameter: 190mm ( 7.5”)
Maximum Base Diameter: 190 mm ( 7.5”)
Minimum Base Diameter: 15 mm ( 0.59”)
Minimum Neck Diameter: 14.5 mm ( 0.57”)

*When used without can guides.


规格

Sort:
1
ProductPage:
SI9008
Controller:
Used with a Sencon Enamel Rater such as the SI9200 or SI9100
Measurement Reporting:
Measurements displayed on the attached Enamel Raters screen
Measurements can be output to PC or printer over serial RS232
Inputs and Outputs:
Integral 8-pin cable for connection to a Sencon benchtop Enamel Rater such as the SI9100 and SI9200
Loading:
Manual loading and unloading
Construction:
Constructed from high-performance engineering-grade plastic with full polyurethane encapsulation. All cable entries are sealed to provide superior corrosion resistance and environmental protection.
Dimensions:
Can Stand Dimensions
Weight:
SI9101, SI9102, SI9201 and SI9202: 1.8kg (3.96lb)
SI9103 and SI9203: 2kg (4.4lb)
Compliance:
CE marked, complies with relevant EU product directives

由于产品不断开发,实际规格可能会发生变化。电&OE

SI9108饮料罐测量支架

适用于要与饮料罐到外径51mm - 65mm, (缩颈或非缩颈)

  • 校准确认按钮。
  • 硬化的不锈钢油箱触点。
  • 确保可靠的电气接触。
  • 易于更换200/202或211直径罐的支架。
  • 集成电解液液位检查探头。
  • 耐用的防腐结构。
  • 进入故障安全检查电路。
Sencon accessory for enamel rating beverage cans

SI9008普通罐测量支架

要与三片罐到外径100mm使用

  • 一体式电解液液位检查探头。
  • 耐用的耐腐蚀结构。
  • 硬化的不锈钢罐触点。
  • 接触故障安全检查电路。
Sencon accessory for enamel rating food and beverage cans
Semi

SI9200
Semi Automatic Enamel Rater

A semi-automatic enamel rater that tests for metal exposure by checking the integrity of coatings or lacquer on metal packaging. See product page for more Information

直接下载

用户手册

SI9008 - SI9108 Beverage Can Stand


SI9008 and SI9108 Can Stands TDS [English].pdf 0.1 Mb Download
SI9101 and SI9102 can stands TDS [English].pdf 0.2 Mb Download

其他资源

Enamel Rating Reference Guide

This reference guide is a collection of useful information relating to the widely used enamel rating test. The test itself is quite simple, but why it works and how to get the best from the test is not necessarily well known.

Can Stand Level Probe Modification.pdf 0.1 Mb Download
Enamel Rating Reference Guide v1.1.pdf 0.4 Mb Download

您可以信赖的全球服务和支持

Sencon 拥有遍布北美、南美、欧洲和亚洲的服务工程师,并由三个技术支持中心经验丰富的行业专家提供支持,您可以信赖 为您的电导仪支架提供支持、认可的校准和售后服务.

全球 95% 的饮料罐在其制造过程中均经过 SENCON 产品的测量、测试、监控或受带领