Medidor de carga axial de mesa

Medidor de carga axial

OPCIONES Y ACCESORIOS

CAPACIDADES DEL PRODUCTO

Sort:

1

ProductPage:

SI630x

Material:

Aluminium and Steel

Cans Accepted:

STANDARD:
Can body diameters: 202, 204, 209, 211 and 214 (52mm to 73mm)
Can neck diameters: 200, 202, 204, 206 and 209 (52mm to 67mm) using quick change, tool free inserts
Can heights: 87 mm to 196 mm (3.42" to 7.71") automatic adjustment

LARGE CAN VARIANT:
Can body diameters: Up to 87mm (3.42")
Can neck diameters: Up to 87mm (3.42") using quick-change, tool free inserts
Can heights: 95 mm to 215 mm (3.74" to 8.46") automatic adjustment

Maximum Batch Size:

50 cans

Measurement Features:

Results can be displayed in N, lbf or kgf (user selectable)
Automatically adjusts for different can heights
Up to 20 different test procedures (user programmable) with test type distinctions for production, setup, recheck, etc.
Test load crush speed settable for each procedure, in range 10 - 200 mm/minute
User-programmable pass, fail and warning bands settable for each procedure
Password protected user levels (operator, supervisor and engineer) to protect settings from unauthorised changes

ESPECIFICACIONES

Sort:

1

ProductPage:

SI630x

Voltage:

100-240 V

Temperature Range:

0°C to 40°C (32°F to 104°F)

Relative Humidity:

0% to 80% non-condensing

Ingress Protection:

IP44

Controller:

Integrated 7” high resolution touch-screen Icon based operator interface (no language dependency)

Measurement Reporting:

Tabular results page
Results for most recent 50 batches stored on gauge
Batch results can be output via RS232 port

Inputs and Outputs:

RS232 (baud rate, stop bits, etc. configurable)

Loading:

Manual loading and unloading

Dimensions:

400mm x 565mm x 625mm (15.75" x 22.24" x 24.61")

Weight:

45kg (99.2lb)

Compliance:

CE marked, complies with relevant EU product directives

Calibration:

Internal load cell is calibrated to traceable standards
Annual recalibration / re-validation of gauge accuracy is strongly recommended

Debido al desarrollo continuo de productos, las especificaciones reales pueden cambiar. E&OE

Short cycle time, precise performance