Sensores de línea
Sensores de máquina
Controles de rociado
Probadores de fugas
Data logger para hornos
Sistemas de visión
Medidores automáticas
Medidores semi-automáticas
Control de recubrimientos
1ª etapa: formación de la lata
Recubrimientos y decoratción
2ª etapa: acabado de la lata
Latas de 3 piezas
Latas de conserva de 2 piezas
Fabricación de tapas
Líneas de llenado de latas
Prueba e inspección | Detección de fugas | Comrobador de microfugas MLT™
Hemos tomado el ampliamente utilizado Micro Leak Tester y hemos potenciado su rendimiento. MLT 2.0 es el microdetector de fugas en línea y fuera de línea de próxima generación para tapas de bebidas y alimentos, que ofrece una sensibilidad de detección y operación del usuario mejoradas, al tiempo que mantiene un bajo nivel de falsos rechazos, facilidad de mantenimiento, bajo costo de propiedad y alto tiempo de actividad del probador.
*Las actualizaciones MLT están disponibles para los sistemas existentes, lo que ofrece una mejora rentable en la capacidad de rendimiento. La nueva HMI de MLT con su interfaz de usuario de pantalla táctil también se puede adaptar a los sistemas existentes. Comuníquese con Sencon para una revisión inicial del sistema.
Debido al desarrollo continuo de productos, las especificaciones reales pueden cambiar. E&OE
MLT™ 2.0 is our second generation on- or off-line micro leak detector for beverage and food ends. The system, which dynamically sets the detection threshold to maintain extremely low false reject rates, can achieve detection rates as low as 0.01cc/10sec. It has been specially developed for improved user operation, ease of maintenance, low cost of ownership and high tester up-time. Leak rate capability is set to ensure a non-destructive test that minimizes false rejects and does not require a wet seal or excessive test pressures that damage the product.
MLT's air pressure test achieves the best balance of sampling speed, sensitivity and running costs, offering the most practical and economic solution to detecting micro-leaks in can lids. The all-new touch screen HMI gives users instant information about the system performance, production data and diagnostic support.
With improved test chamber dynamics that hold the end to create the best seal, MLT™ 2.0 is able to achieve detection rates as low as 0.01cc/sec, which is twice as sensitive as previous versions.
False rejects waste time through unnecessary investigation. Sencon's MLT™ 2.0 micro leak detector works by default at realistic detection thresholds, while the intelligent software actively monitors background noise and dynamically adjusts the threshold to operate at maximum sensitivity while ensuring up to 6-Sigma false reject performance.
The online MLT™ can test 2% of production output with a press speed of 850 ends per minute per lane.
MLT™ only needs regular wiping of the test chamber seals to run reliably.
Sampling at fixed intervals can result in ends being tested from only one group of belt pockets. To avoid this the on-line MLT™ has an option called 'walk the belt', which varies the sampling rate to ensure that lids from every belt pocket are sampled. In this mode the average sample rate is 15 lids per minute, but protection against faulty product is greater.
MLT is a modular system, enabling budgeted purchases and fully compatible system expansion. From 1 to 4 heads can be installed to suit different press configurations.
Air or Helium: which is best?
Despite being the second most abundant element in the universe, helium is quite rare on earth. With the cost of helium rising rapidly and likely to keep on increasing, it's worth looking into the pros and cons of using air or helium for micro-leak testing.
Read our article here.
Para acceder a MANUALES DE USUARIO, SOFTWARE Y RECURSOS ADICIONALES para Comrobador de microfugas MLT™ de Sencon INICIAR SESIÓN en nuestra Biblioteca de documentos técnicos. Si no tienes una cuenta de usuario, puedes SOLICITAR LA INSCRIPCIÓN AQUÍ.
TENGA EN CUENTA: Se requiere una dirección de correo electrónico de la empresa para acceder. No se aceptan cuentas de correo electrónico personales ni basadas en web (por ejemplo, gmail). Tenga en cuenta que el proceso de registro no está automatizado, por lo que la concesión de acceso puede retrasarse dependiendo de cuándo se realiza la solicitud.
mírame en acción
Con ingenieros de servicio ubicados en Norteamérica, Sudamérica, Europa y Asia, respaldados por el soporte de nuestros experimentados especialistas de la industria en tres centros de soporte técnico, puede confiar en Sencon para obtener soporte. , calibración acreditada y servicio postventa para su Comrobador de microfugas MLT™.
The information you provide will only be used in accordance with our Privacy Statement.
ENVIAR