Medidor automático de latas recortados (sin cuello)

MULTIPLE CAN SIZES

Cans with different can diameters and heights can be measured with no need for change parts. So several standard can sizes and shapes can easily and quickly be tested with a single gauge.

SINGLE, DUAL AND TRIPLE PROBE VERSIONS

The Single-Probe model can measure side wall thickness at multiple locations with 255 maximum total readings, including up to 12 vertical locations (to 40 mm from the bottom of the can) and numerous radial positions. The data yielded can be used for side wall modelling to find the transition point. However, as the side wall measurements are made subsequent to the can height and dome depth readings, the cycle time is slightly extended.

The Dual-Probe model measures the top and mid wall at two fixed heights concurrently, reducing the overal cycle time.

The Triple-Probe model measures the top and mid wall at three fixed heights concurrently, reducing the overal cycle time.

Fixed probe heights are specified by the customer at the time of ordering.

ONE SETTING PIECE

 Every measurement for every batch is automatically qualified using a single UKAS certificated setting piece (for all can sizes). The gauge constantly monitors its own performance and recalibrates if drift is detected. A single setting piece not only saves time and storage space, but also saves costs as only a single setting master requires annual certification. Sencon supply two identical setting pieces, so one can be used while the other is sent for certification.