Medidor de carga axial automático

Master Series™ Medidor de carga axial

MÓDULO PRINCIPAL Y OPCIONES DE TRANSPORTADOR

Each lane has a capacity of 24 cans (211 diameter).
Automatic in-line feed is possible as special option on all lanes.
Conveyor extensions are also possible.

OPCIONES Y ACCESORIOS

CAPACIDADES DEL PRODUCTO

Sort:

1

ProductPage:

MS630x

Material:

Aluminium and Steel

Cans Accepted:

202 to 211 and up to three neck diameters without change parts (200 - 206)
Large can and Super size can variants are also available.

Maximum Batch Size:

255 cans (auto fed)

Test Types:

Axial collapse load: range 200 to 2500 N

Measurement Features:

Large number of measurement combinations and pass / warning / fail thresholds can be defined and stored using programmable measurement procedures and tests, allowing different parameters to be set easily for different can types or sizes, different customers or different measurement purposes (production, recheck, setup, etc.).
Max. test load settable up to maximum of 2500 N
Test crush speed settable in range 10 to 200 mm / minute

Accuracy:

±1% of FSD

ESPECIFICACIONES

Sort:

1

ProductPage:

MS630x

Voltage:

100-120 v or 200-240v (Gauge is powered through the Conveyor Core)

Air Supply:

6 to 7 bar

Temperature Range:

10°C to 50°C (50°F to 122°F)

Relative Humidity:

0% to 80% non-condensing

Safety:

Red, amber and green beacons to indicate system status from a distance
Relay outputs for flexible triggering of external (customer) warning systems

Controller:

Process Master™ gauge software running on an integrated PC within the Conveyor module

Measurement Reporting:

Batch results displayed on PC screen and optionally sent as report to network storage or network printer.
Factory line and machine nos. can be entered (manually or by association with procedure) for measurement traceability.
Results can be displayed in N, lbf or kgf

Loading:

Automatic

Dimensions:

Gauge cabinet (including rear chute)
Width: 1053 mm (41.45")
Depth: 780 mm (30.70")
Height: 1840 mm (72.44")

For full system, add the following to the width:
Reject station: 375 mm / 15.0”
Single Lane Conveyor: 1941 mm (76.42”)
3 or 5 Lane Conveyor: 2401 mm (94.53”)

Compliance:

CE marking: complies with relevant EU product directives

*Requiere transportador con rango de temperatura extendido

Debido al desarrollo continuo del producto, las especificaciones reales pueden cambiar. E&OE

Short cycle time, precise performance

Help Videos for Master Series™ Medidor de carga axial