Plataforma de medición de tapas básicas y conformadas

ES8000™ Medidor de de tapas básicas y conformadas

Otros paquetes de medición en la plataforma de medición ES8000

CAPACIDADES DEL PRODUCTO

Sort:

1

ProductPage:

ES8001

Material:

Aluminium and Steel

Ends Accepted:

46mm to 95mm (1.81" to 3.74") nominally 113 to 307 with automatic adjustment (an extended range version is also available by special order, accommodating diameters up to 110mm).
All circular easy open Beverage and Food ends (for other shapes please contact you regional Sencon office)
Plain, colored and black coated ends supported

Machine Throughput:

Shell Measurement: Throughput times depend on the diameter of the shell, the number of slices measured, and whether grain orientation is selected. Measuring 2 slices on a 60mm shell with no grain orientation takes 66 seconds
Progression Measurement: Approximately 7.5 minutes per lane (4 ends per lane) depending on the type and number of features selected.

Measurement Features:

All standard features* can be measured including: Bubble, Button, Rivet (including off-center), curl, bead, coining, panel, anti-missile and off-draw.
Measurements are made on both consumer and product sides simultaneously.
Additional measurements can be added on request.

ESPECIFICACIONES

Sort:

1

ProductPage:

ES8001

Controller:

24” Touch-screen monitor running Sencon’s Process Master™ gauge software on an internal PC

Measurement Reporting:

The last 50 batch results and scan profiles are available on the PC screen and optionally can be sent as report to network storage or network printer. Printer (pdf) and network (csv) reports in Sencon standard format. Custom report formats are available on request.
The gauge offers the ability to export DXF files for comprehensive and detailed analysis of virtual sections.

Loading:

Automatic from three drawers each with fully adjustable end locators (2 drawers on the ES8000X)

Dimensions:

Weight:

290 kg

Compliance:

CE marking: complies with relevant EU product directives
UKCA marked: complies with relevant UK product regulations

Calibration:

Integrated traceable calibration piece as thickness reference
Annual calibration of gauge is strongly recommended

Debido al desarrollo continuo de productos, las especificaciones reales pueden cambiar. E&OE

A common gauging platform

The unique ES8000 hardware platform can be configured as a PROGRESSION GAUGE, SHELL GAUGE, or both. The gauge redefines standards for flexibility and measurement repeatability. The common gauging platform makes it easy to add a second gauging function at any time in the future. So, if your needs change you can simply add a second gauging function inside the same cabinet, saving floor space and costing less than investing in two, new, separate gauges.

• Dual laser calipers simultaneously scan above and below the end
• Ends accepted: all circular beverage and food ends and shells
• Rivet position: either centered or off-centre rivets measured
• End finishes: plain, colored and black coated ends measured
• Infeed: three drawers each with fully adjustable end locators

IMPROVE PRODUCT QUALITY

Non-contact sensors simultaneously measure features from both top and bottom surfaces of the end. The compiled test results present a clear, accurate and comprehensive visualization of the features measured. If specification limits are reached, the gauge gives immediate warning via the operator screen and the warning beacon. Results are classified, displayed and automatically exported to 3rd party SPC systems.

MULTIPLE SIZES, FLEXIBLE LOADING

Batches of different sizes can be set up via three loading drawers, which can be loaded while the gauge is running. Each drawer has separate input and output locations for easy reference.

ADDITIONAL END DESIGNS

Additional end designs or features can be added at a later date, made possible with Sencon's new, flexible Gauge Builder software framework.

Virtual Sectioning™

Sencon's Virtual Sectioning™ feature shows complete and accurate profiles of all progression stages, including material thickness.Users can carry out microscopic analysis by zooming in on the fine detail, removing the need for the time consuming and destructive task of physically sectioning ends.

Add Shell measurement inside the same cabinet

The unit can easily be upgraded to add Shell Gauge functionality in the same cabinet in the future, saving floor space and costing less than investing in two separate gauges. A combined shell and progression gauge can also be specified at the time of purchase.