Gauging & Measuring | Semi Automatic Gauges | SI9600 Coating Thickness Gauge

SI9600 Coating Thickness Gauge

Rapid and accurate measurement of lacquer film thickness (film weight) of internal and external coatings on beverage and food cans or flat sheets

If coating thickness (weight) measurements suffer from a degree of variation, you have to err on the safe side when applying coatings in order to be sure that target weights are met. Therefore a percentage of unnecessary coating is always being applied. With reliable measurements from Sencon's coating thickness probes, the coating process can be brought under tighter control.

  • Accurate readings
  • Rapid, semi-automatic operation
  • Better operating efficiencies
  • Reduced lacquer consumption
  • Improved product quality
  • Use with a Sencon Coatings Probe
icon for 2-piece (DWI) food cansFor 2-piece (DWI) cans
icon for 3-piece (welded) food cansFor 3-piece (welded) cans
icon for beverage can ends/lidsFor beverage ends / lids
icon for food can ends/lidsFor food ends / lids
icon for sheet coating linesFor coated sheets
con for aerosol cansFor DWI aerosol cans
icon for bottle cansFor monobloc bottle cans
icon for can fillersFor can filling lines
PRODUCT VARIANTS
SPECIFICATIONS
PRODUCT DETAILS
ACCESSORIES
HELP VIDEOS
SUPPORT RESOURCES

SI9600 Coating Thickness Gauge

SortProductPageProduct CodeDescription
187SI9600SI9600Coating Thickness Gauge
190SI9600SI9700Coating Thickness Gauge. Available end of Q3. NEW
195SI9600SI9600HF*High Frequency Coating Thickness Gauge for use with SI9560 probe

Please Note: To use this gauge you will also need a suitable coatings probe such as Sencon's SI9651 for testing flat sheets, SI9507 for formed cans, or SI9560 for formed aerosols and tubes.
*The SI9600HF is a special variant of the SI9600 Coatings Thickness Gauge that uses a higher frequency test current which is needed for the smaller surface area of the SI9560 formed tube probes tips.


OPTIONS & ACCESSORIES

SortProductLinkProduct CodeItemDescription
0SI9600SI9507Formed Can ProbeFor use with beverage cans. See product page for more Information
0SI9600SI9560Formed Tube/Aerosol ProbeFor measuring the internal and external coating thickness on aerosols or long tubes with very small diameters. See product page for more Information
0SI9600SI9750HoverprobeFor measuring coating thickness on flat sheets. See product page for more Information
12SI9600SI9508Foot SwitchAllows hands free operation for older gauges or where 'auto' mode has been switched off
50PG5600, SI9600, SC8880, SI611x, SI630x, SI9100, SI9208, SI9650, SI9200SX1000Data-Bridge SoftwareAdds data logging functionality to gauges with only an RS232 serial interface. Download the SX1000 Product Data Sheet

PRODUCT CAPABILITIES

Sort:
1
ProductPage:
SI9600
Maximum Batch Size:
1 to 100 cans
Measurement Features:
Internal lacquer and external over varnish*
Accuracy:
Linearity better than 1% (subject to stability of probe and sample) tested against national standards with ISO9000 certification
Capacity:
Data Storage: 1000 readings (approximately)

*Contact Sencon for coatings with a high metallic content


SPECIFICATIONS

Sort:
1
ProductPage:
SI9600
Voltage:
100 – 240 V, single phase, 47 or 63 Hz
Temperature Range:
5°C to 45°C (41°F to 113°F)
Relative Humidity:
0% to 80% non-condensing
Ingress Protection:
IP65
Controller:
Multi-line LCD display with 10 function keys
Measurement Reporting:
Measurements displayed on LCD display
Measurements can be output to PC or printer over serial RS232
Inputs and Outputs:
5-pin connector for connecting to probes (see accessories for compatible probes)
Data output: RS232 serial connector (for connecting to PC or printer) 150, 300, 600, 1200, 2400, 4800, 9600, 19200 baud
Dimensions:
200mm x 252mm x 80mm (7.87" x 9.92" x 3.15")
Weight:
1.6kg (3.5lb)
Compliance:
CE marked, complies with relevant EU product directives
Calibration:
Annual calibration is strongly recommended

Due to continual product development, actual specifications may change. E&OE

Reduces unproductive operator time and allows quicker machine setups

ACCURATE READINGS

The gauge is first calibrated to a known coating sample of the type being tested. Comparative test readings are then highly accurate with excellent repeatability.

SEMI-AUTOMATIC OPERATION

Once calibrated, the operator only has to put the probe on the product in the test location. The SI9600 then automatically checks for stability, takes and displays the reading, and sends results via RS232 serial port.

BETTER OPERATING EFFICIENCIES 

Rapid yet accurate operation reduces unproductive operator time and allows quicker machine setups.

REDUCED LACQUER CONSUMPTION 

Exact calibration, improved accuracies, and precise film weight data leads to improved control and potentially lower film weight targets.

IMPROVED PRODUCT QUALITY 

Reliable readings allow coating or spray equipment to be setup much closer to the required specifications.

LOWER SPOILAGE 

Rapid operation allows more frequent tests at no additional cost. Problems and trends can be identified earlier, reducing spoilage.

OPTIONAL DATA BRIDGE

For non compatible SPC systems, an optional application SX1000 is available which converts serial data to .CSV files

User friendly features

  • Quick connections with recessed connectors to reduce risk of cable damage
  • Default language-independent icon mode
  • Optional text mode with multi - language support
  • Soft - touch keys for accurate data entry
  • Flexible configuration, data storage and output options
  • Large number of preset and user defined coatings channels
  • Corrosion-proof polyurethane case (rated to IP65) ensures maximum reliability and durability on the factory floor
  • Automatic reminders to re-calibrate and change probe tips
Formed

SI9507
Formed Can Probe

For use with beverage cans. See product page for more Information

Formed

SI9560
Formed Tube/Aerosol Probe

For measuring the internal and external coating thickness on aerosols or long tubes with very small diameters. See product page for more Information

Help Videos for SI9600 Coating Thickness Gauge

Introduction

Setting up for the first time

How the gauge measures coatings

Calibration Overview

Multi-point calibration

Probe tip maintenance

Sample maintenance

Error display

DIRECT DOWNLOADS

USER MANUALS

User Manuals


Manual de usuario del medidor de espesor de recubrimientos SI9600 (español).pdf 3.4 Mb Download
Manual do usuário do medidor de espessura de revestimentos SI9600 (português).pdf 2.5 Mb Download
Manuale d'uso misuratore di spessore per rivestimenti SI9600 (italiano).pdf 1.9 Mb Download
Manuel d'utilisation de la jauge d'épaisseur de revêtements SI9600 (français).pdf 3.3 Mb Download
SI9600 Beschichtungsdickenmessgerät Benutzerhandbuch (Deutsch).pdf 3.4 Mb Download
SI9600 Coatings Thickness Gauge User Manual (English).pdf 2.4 Mb Download
Knowledge Base Software by: KnowledgeBase Manager Pro v6.2.2 (Built with: JS.GUI - IT Helpdesk)

ADDITIONAL RESOURCES

Additional Documentation


Instruction sheet, changing capacitive coatings gauge probe tips [English].pdf 1.7 Mb Download
Modalità icona SI9600 - Configurazione rapida [italiano].pdf 0.5 Mb Download
Modo de ícono SI9600 - Configuración rápida [Español].pdf 2.7 Mb Download
SI9600 Calibration and Traceability [English].pdf 0.5 Mb Download
SI9600 Coating Thickness Measurement Best Practice [English].pdf 1.6 Mb Download
SI9600 Icon Mode - Quick Setup [English].pdf 3 Mb Download
Knowledge Base Software by: KnowledgeBase Manager Pro v6.2.2 (Built with: JS.GUI - IT Helpdesk)

Coatings Measurement Gauges

Master Series™ Film-Scan™ Optical Coatings Gauge

Film-Scan™
Optical Coatings Gauge

The Master Series™ fully automatic Film-Scan™ optical coatings gauge accurately and consistently measures internal and external coatings/film thickness on beverage cans.


Click for more
Benchtop optical coatings thickness gauge for beverage cans

FILM-SCAN™
OPTICAL COATINGS GAUGE

A compact, semi-automatic benchtop gauge for non-contact, optical scanning measurement of coatings/film thickness on beverage cans.


Click for more

Annual calibration will ensure your SI9600 Coating Thickness Gauge continues to perform as it should

As the original manufacturer, Sencon recommends that your equipment is re-calibrated annually. So whether you need on site or return to base calibration for gauges, gauge setting pieces, or other important quality assurance equipment such as oven loggers – make sure to request your re-calibration with Sencon.


Learn more about why calibration is important

See me
in action

RELATED PRODUCT NEWS

WORLDWIDE SERVICE AND SUPPORT YOU CAN TRUST

With service engineers based in North and South America, Europe and Asia, backed up by support from our experienced industry specialists at three technical support centers, you can trust Sencon for support, accredited calibration and after-sales service for your SI9600 Coating Thickness Gauge.

95% of beverage cans worldwide have been measured, tested, controlled or influenced in their manufacture by a Sencon product