Line Control Sensors
Machine Control Sensors
Spray Controls
Leak Testers
Oven Loggers
Vision Systems
Fully Automatic Gauges
Semi-automatic Gauges
Coatings Gauges
Front End Can Formation
Coating & Decorating
Back End Can Finishing
3-piece food can lines
2-piece food can lines
Ends making lines
Products for can fillers
Gauging & Measuring | Semi Automatic Gauges | Formed Tube Probe
The Formed Tube/Aerosol Probe is used with a dedicated high frequency version (SI9600HF) of Sencon's Coating Thickness Gauge to measure the internal and external coating thickness (film weight) on aerosols or long tubes with very small diameters. Instead of having to cut the tubes open and use the time consuming weigh-strip-weigh method, you can obtain instant results about coating distribution inside formed tubes and aerosols in a non-destructive and repeatable way with excellent R&R.
PLEASE NOTE: The SI9560 only works with the SI9600HF coating thickness gauge, a special variant of the SI9600 Coatings Thickness Gauge that uses a higher frequency test current which is needed for the smaller surface area of the probe tips.
PLEASE NOTE: The SI9560 is not designed to measure highly conductive coatings.
Due to continual product development, actual specifications may change. E&OE
If coating weight measurements suffer from a degree of variation, operators have to err on the safe side when applying coatings in order to be sure that target weights are met. Therefore a percentage of unnecessary coating is always being applied. With reliable measurements from Sencon's coating thickness probes, the coating process can be brought under tighter control. Even a small reduction in coatings usage will quickly deliver a return on investment, saving money and raw materials.
The SI9560 Formed Tube & Aerosol Probe is used with a special variant of the COATING THICKNESS GAUGE. Dedicated SI9600HF coatings gauge uses a higher frequency test current which is needed for the smaller surface area of the probe tips. Contact Sencon for details.
SI9600Coatings Thickness Gauge
Semi-automatic gauge for measuring thickness (coating weight). See product page for more Information
SI9560 Formed Tube Probe for Coatings Thickness Gauge
Film-Scan™Optical Coatings Gauge
The Master Series™ fully automatic Film-Scan™ optical coatings gauge accurately and consistently measures internal and external coatings/film thickness on beverage cans. Click for more
FILM-SCAN™OPTICAL COATINGS GAUGE
A compact, semi-automatic benchtop gauge for non-contact, optical scanning measurement of coatings/film thickness on beverage cans. Click for more
Formed Can Probefor 2-Piece Cans
The Formed Can Probe is used with the SI9600 Coatings thickness gauge to test internal and external coating thickness on 2-piece beverage cans. Click for more
See me in action
With service engineers based in North and South America, Europe and Asia, backed up by support from our experienced industry specialists at three technical support centers, you can trust Sencon for support, accredited calibration and after-sales service for your Formed Tube Probe.
The information you provide will only be used in accordance with our Privacy Statement.
SEND