Sensores de línea
Sensores de máquina
Controles de rociado
Probadores de fugas
Data logger para hornos
Sistemas de visión
Medidores automáticas
Medidores semi-automáticas
Control de recubrimientos
1ª etapa: formación de la lata
Recubrimientos y decoratción
2ª etapa: acabado de la lata
Latas de 3 piezas
Latas de conserva de 2 piezas
Fabricación de tapas
Líneas de llenado de latas
Prueba e inspección | Detección de fugas | Cuásar™ ULTP™
Los probadores de luz Sencon, que comúnmente se suministran con los cuellos más recientes, brindan detección de luz de alta velocidad de poros, bridas partidas y domos agrietados. Se logran tasas de rechazo del 100 % en latas con orificios de 0,002 pulgadas (50 micrones).
TENGA EN CUENTA: la actualización de LED requiere que el sistema host ULTP tenga la última especificación. Para la mayoría de los sistemas esto representa una revisión importante. Hay una variedad de opciones disponibles para la actualización de LED, según el sistema ya instalado. Póngase en contacto con su oficina regional de Sencon para obtener asesoramiento.
Sencon light testers, which are commonly supplied on all the latest neckers, provide high speed light detection of pinholes, split flanges and cracked domes. Rejection rates of 100% are achieved on cans with 0.002 inch (50 microns) pinholes. Cans are rejected by an air jet on the can guide controlled by Sencon's high speed solenoid driver technology. LED lighting offers low maintenance, high performance illumination and solid state sensors detect leaks using the latest silicon light detectors for robust and trouble free operation.
Sencon's Flash Control™ is an ultra-high speed, closed loop feedback between the detectors and the illumination pack. If a damaged can or an empty pocket floods the system with light, Flash Control™ immediately switches off the illuminators to prevent the detectors from being blinded. This means there is no delay for the detectors to recover before inspecting the next can.
LED lighting offers low maintenance, high performance illumination and solid state sensors detect leaks using the latest silicon light detectors for robust and trouble free operation.
OEM manufacturers may fit one of several different light detectors to the can leak tester systems they supply to you. However, light testers are not all the same. Back to back tests with alternative systems have consistently shown that Sencon detectors are much more sensitive to leak detection, with fewer false positives in actual product. So, to ensure that you continue to get the best performance, it is important that you actively specify Sencon Quasar™ light testers to be fitted to your systems.
Pioneering, developing and supporting on-line leak testing.
By far the largest in the industry.
Between Sencon light testers saves spares holding and helps with engineer familiarity.
Many packaging customers recommend Sencon as their preferred choice for testing.
Sencon keeps users at the forefront of detection capability, and wherever possible, delivers improved features or performance.
Sencon has a constant redesign process to ensure that applications remain available and outwardly the same even if electronic components become obsolete. Upgrade paths and future proofing is delivered as much as possible and existing systems are supported far beyond what most suppliers deliver.
Analog photomultipliers are prone to degrade over time, requiring constant adjustment or regular replacement. Photomultipliers are found on some single detector light testers (such as Reynolds RT5 or RT6*). Sencon can replace them with a solid state electronics pack and a simplified lighting system. This delivers greater stability with equivalent detection levels and no need for regular adjustments as the light detector does not become less sensitive over time. Maintenance is minimized as lamp replacement and cleaning of the detector lens are the only scheduled tasks. Existing quartz-halogen systems can be upgraded with an LED lighting array and a more sophisticated detector system.
High intensity halogen lamps, which are supplied as standard on older installations, have proved to be simple and reliable. However, LEDs are better matched to the sensitivity of the detectors than broad spectrum halogen light. Installing an LED lighting array improves the sensitivity of the system. Using solid state LED lighting should also reduce the frequency of maintenance required, further minimizing downtime.
Built in reflectors ensure that illumination is evenly distributed around the can, removing any need for an infeed lamp. The LED lighting array is available in 3x3 or 3x4 configuration, which allows greater flexibility with different can sizes.
The LED upgrade requires the host ULTP system to be brought up to the latest specification. For most systems this represents a major overhaul, including:
*Reynolds RT5 and RT6 trademarks are owned by the STOLLE MACHINERY COMPANY LLC
Para acceder a MANUALES DE USUARIO, SOFTWARE Y RECURSOS ADICIONALES para Cuásar™ ULTP™ de Sencon INICIAR SESIÓN en nuestra Biblioteca de documentos técnicos. Si no tienes una cuenta de usuario, puedes SOLICITAR LA INSCRIPCIÓN AQUÍ.
TENGA EN CUENTA: Se requiere una dirección de correo electrónico de la empresa para acceder. No se aceptan cuentas de correo electrónico personales ni basadas en web (por ejemplo, gmail). Tenga en cuenta que el proceso de registro no está automatizado, por lo que la concesión de acceso puede retrasarse dependiendo de cuándo se realiza la solicitud.
Con ingenieros de servicio ubicados en Norteamérica, Sudamérica, Europa y Asia, respaldados por el soporte de nuestros experimentados especialistas de la industria en tres centros de soporte técnico, puede confiar en Sencon para obtener soporte. , calibración acreditada y servicio postventa para su Cuásar™ ULTP™.
The information you provide will only be used in accordance with our Privacy Statement.
ENVIAR