Line Control Sensors
Machine Control Sensors
Spray Controls
Leak Testers
Oven Loggers
Vision Systems
Fully Automatic Gauges
Semi-automatic Gauges
Coatings Gauges
Front End Can Formation
Coating & Decorating
Back End Can Finishing
3-piece food can lines
2-piece food can lines
Ends making lines
Products for can fillers
Gauging & Measuring | Semi Automatic Gauges | Formed Can Probe
The SI9507+ formed can probe is used with the SI9600 Coatings Gauge for reliable coatings thickness (film weight) measurements, allowing the coating process to be brought under tighter control. Even a small reduction in coatings usage will quickly deliver a return on investment, saving money and raw materials.
Probe tips should be changed every 4 weeks.
Due to continual product development, actual specifications may change. E&OE
If coating weight measurements suffer from a degree of variation, you have to err on the safe side when applying coatings in order to be sure that target weights are met. Therefore a percentage of unnecessary coating is always being applied. With reliable measurements from Sencon's coating thickness probes, the coating process can be brought under tighter control. Even a small reduction in coatings usage will quickly deliver a return on investment, saving money and raw materials.
The Formed Can Probe (SI9507+) is used with the SI9600 Coating Thickness Gauge to test internal and external coating thickness on 2-piece Beverage cans. The scissor action jaws are opened manually against spring pressure. Guide rings along the probe arms help the operator to move the can to the correct positions for testing. When the jaws are released, the spring release action applies a consistent and known pressure for each test, avoiding the risk of operator variability and ensuring accurate and repeatable readings.
SI9600Coatings Thickness Gauge
Semi-automatic gauge for measuring thickness (coating weight). See product page for more Information
Introduction
Setting up for the first time
How the gauge measures coatings
Calibrating coatings channels
Multi-point calibration
Probe tip maintenance
Sample maintenance
Error display
User Manual
Film-Scan™Optical Coatings Gauge
The Master Series™ fully automatic Film-Scan™ optical coatings gauge accurately and consistently measures internal and external coatings/film thickness on beverage cans. Click for more
FILM-SCAN™OPTICAL COATINGS GAUGE
A compact, semi-automatic benchtop gauge for non-contact, optical scanning measurement of coatings/film thickness on beverage cans. Click for more
HoverProbe™for flat sheets
The SI9651 Hoverprobe is used with the SI9600 Coatings thickness gauge to test coating thickness on flat sheets. Click for more
Formed Tube& Aerosol Probe
The SI9560 is used with the SI9600 Coatings thickness gauge to measure the internal and external coating thickness on aerosols or long tubes with very small diameter. Click for more
With service engineers based in North and South America, Europe and Asia, backed up by support from our experienced industry specialists at three technical support centers, you can trust Sencon for support, accredited calibration and after-sales service for your Formed Can Probe.
The information you provide will only be used in accordance with our Privacy Statement.
SEND