Gauging & Measuring | Semi Automatic Gauges | Superstand™

SuperStand™ for outsize products

For checking coatings porosity on metal packaging products with narrow necks, large base diameters or low profiles.

A flexible and multi-featured can stand for the SI9100 Semi-auto Enamel Rater that accepts a wide range of metal products. A version is available for testing crown closures.

  • Preserve accuracy and repeatability during the test
  • Provide ease of use with outsize or non-standard metal packaging
  • Protect components and ensure longevity of the product
  • Aerosol cans - both 3pc welded and monobloc
  • Bottle cans from 200ml to 440ml or larger
  • Large diameter welded cans and low profile cans
  • For use with a Sencon SI9100 Enamel Rater
icon for 2-piece (DWI) food cansFor 2-piece (DWI) cans
icon for 3-piece (welded) food cansFor 3-piece (welded) cans
con for aerosol cansFor DWI aerosol cans
icon for bottle cansFor monobloc bottle cans
icon for can fillersFor can filling lines
PRODUCT VARIANTS
SPECIFICATIONS
PRODUCT DETAILS
ACCESSORIES
SUPPORT RESOURCES

Superstand™

SortProductPageProduct CodeDescriptionSupported Can DiametersMinimum Can NeckSupported Can HeightsTest Crowns
191SI9015SI9015-CRW*Superstand™ for Crown closuresUp to 190mm (7.5")From 14.5mmUp to 320mm

*The base dome of standard beverage or aerosol cans, and the base rim of welded food cans will fit over the crown adapter and touch the contact blades, allowing the SI9015-CRW to also be used as a standard Superstand™ SI9015.


OPTIONS & ACCESSORIES

SortProductLinkProduct CodeItemDescription
0SI9008, SI9108, SI9015, SI9019, SI9101, SI9102SI9200Semi Automatic Enamel RaterA semi-automatic enamel rater that tests for metal exposure by checking the integrity of coatings or lacquer on metal packaging. See product page for more Information

PRODUCT CAPABILITIES

Sort:
1
ProductPage:
SI9015
Material:
Aluminium and Steel
Cans Accepted:
Maximum Can Height: 320 mm (12.60")
Maximum Body Diameter: 190mm ( 7.5")
Maximum Base Diameter: 190 mm ( 7.5")
Minimum Base Diameter: 15 mm ( 0.59")
Minimum Neck Diameter: 14.5 mm ( 0.57")


SPECIFICATIONS

Sort:
1
ProductPage:
SI9015
Controller:
Used with a Sencon Enamel Rater such as the SI9200 or SI9100
Measurement Reporting:
Measurements displayed on LCD display
Measurements can be output to PC or printer over serial RS232
Loading:
Manual loading and unloading
Compliance:
CE marked, complies with relevant EU product directives

Due to continual product development, actual specifications may change. E&OE

Used in combination with the SI9100 Semi-auto Enamel Rater

IDEALLY SUITED FOR

  • Aerosol cans - both 3pc welded and monobloc
  • Bottle cans from 200ml to 440ml or larger
  • Large diameter welded cans
  • Low profile cans

WIDE RANGE OF DIMENSIONS ACCEPTED

  • Height up to 320mm
  • Base rim diameter 15mm - 175mm
  • Neck diameter from 14.5mm

FEATURES

  • Tungsten carbide can-contact blades
  • Self-test control knob on the side of the stand
  • Height adjustable test probe and electrolyte probes for flexibility with the amount of probe inside the can and precise setting of the minimum electrolyte level
  • Corrosion proof materials used throughout for long product life in the harsh enamel rating environment
  • All electrics sealed and protected for long term accuracy and reliability
  • Easily replaceable link cables for easy and cost effective maintenance
  • Advanced electronic safeguards: e.g. voltage sensing at the probe tip with automatic voltage compensation for maximum test accuracy at all times
  • Teflon splash guard to reduce the risk of electrolyte bridging across the probes
  • Narrow gap between the level check and test probes allows small necked cans to be tested
  • Probe adjustment thumb wheel locks to maximize repeatability

VERSION FOR CROWN CLOSURES

The Superstand is available as a version which accepts crown closures (SI9015-CRW), allowing the internal coating to be enamel rated. The SI9015-CRW can also be used in the same way as the standard model as the base dome of beverage or aerosol cans, and the base rim of welded food cans fit over the crown adapter to touch the contact blades.

Semi

SI9200
Semi Automatic Enamel Rater

A semi-automatic enamel rater that tests for metal exposure by checking the integrity of coatings or lacquer on metal packaging. See product page for more Information

DIRECT DOWNLOADS

TECHNICAL DATA SHEETS

Superstand Can Stand SI9015


SI9015 Superstand TDS [English].pdf 58.4 Kb Download
SI9015 Superstand TDS [French].pdf 19.1 Kb Download
SI9015 Superstand TDS [Spanish].pdf 18.7 Kb Download
SuperStand CRW removal-01.pdf 81.2 Kb Download
Knowledge Base Software by: KnowledgeBase Manager Pro v6.2.2 (Built with: JS.GUI - IT Helpdesk)

ADDITIONAL RESOURCES

Enamel Rating Reference Guide

This reference guide is a collection of useful information relating to the widely used enamel rating test. The test itself is quite simple, but why it works and how to get the best from the test is not necessarily well known.

Can Stand Level Probe Modification.pdf 0.1 Mb Download
Enamel Rating Reference Guide v1.1.pdf 0.4 Mb Download
Knowledge Base Software by: KnowledgeBase Manager Pro v6.2.2 (Built with: JS.GUI - IT Helpdesk)

Complete range of enamel rating gauges

Master Series™ Automatic Enamel Rater

Master Series™
Enamel Rater

The Master Series™ fully automatic enamel rater is a highly flexible and cost effective solution for automatic enamel rating (metal exposure testing).


Click for more
PG5600 Automatic Enamel Rater

Compact Auto
Enamel Rater

The PG5600 is a simple, low cost and compact automatic enamel rater that is ideally designed for placing next to a palletizer, on mezzanines, or in the spray area.


Click for more
SI9200 semi-automatic enamel rater gauge

Semi-Automatic
Enamel Rater

The Sencon SI9200 semi-automatic enamel rater tests for metal exposure by checking the integrity of coatings or lacquer on metal packaging.


Click for more
MEER™ Multi-End Enamel Rater

Multi-End
Enamel Rater

The Multi End Enamel Rater (MEER) carries out fast and reliable checking of lacquer integrity on multiple ends in one pass.


Click for more

WORLDWIDE SERVICE AND SUPPORT YOU CAN TRUST

With service engineers based in North and South America, Europe and Asia, backed up by support from our experienced industry specialists at three technical support centers, you can trust Sencon for support, accredited calibration and after-sales service for your Superstand™.

95% of beverage cans worldwide have been measured, tested, controlled or influenced in their manufacture by a Sencon product