Inverted Blank Detector
With the naked eye it is almost impossible to see inverted cans at line speed, especially with clear varnishes. It is also impossible with any other currently available sensor. This unique sensor works reliably with almost all types of coating.
The only sensor on the market that helps to prevent the formation of inside-out cans by reliably detecting an inverted 3-piece can body with lacquer on the wrong side.
REDUCE THE RISK OF ...
- Customers with pallets of rusty cans
- Consumers with contaminated product
- Costly returns
- Loss of business
- Loss of reputation
If coated sheets or 'body blanks' are put back into the process line upside down, the resulting cans will come out of the welder with their protective coating on the outside not on the inside. Eventually this could lead to badly corroded or blown cans after filling, or at the very least a to a whole batch of cans being held for inspection and sorting. With the Sencon SC621 you can reliably find those "inside-out" cans with lacquer on the wrong side.
NOTE:
For this sensor to work, the can/blank must be uncoated on one side
|Deutsch |EspaÑol |FranÇais |Italiano |中文版|
|about us |contact |privacy statement |print this page |